This guide is intended for developers or administrators who want to contribute a new package, feature, or bugfix to Spack. It assumes that you have at least some familiarity with Git VCS and Github. The guide will show a few examples of contributing workflows and discuss the granularity of pull-requests (PRs). It will also discuss the tests your PR must pass in order to be accepted into Spack.
First, what is a PR? Quoting Bitbucket’s tutorials:
Pull requests are a mechanism for a developer to notify team members that they have completed a feature. The pull request is more than just a notification—it’s a dedicated forum for discussing the proposed feature.
Important is completed feature. The changes one proposes in a PR should correspond to one feature/bugfix/extension/etc. One can create PRs with changes relevant to different ideas, however reviewing such PRs becomes tedious and error prone. If possible, try to follow the one-PR-one-package/feature rule.
Spack uses a rough approximation of the Git Flow
branching model. The develop branch contains the latest contributions, and
master is always tagged and points to the latest stable release. Therefore, when
you send your request, make
develop the destination branch on the
Spack uses Travis CI for Continuous Integration testing. This means that every time you submit a pull request, a series of tests will be run to make sure you didn’t accidentally introduce any bugs into Spack. Your PR will not be accepted until it passes all of these tests. While you can certainly wait for the results of these tests after submitting a PR, we recommend that you run them locally to speed up the review process.
Oftentimes, Travis will fail for reasons other than a problem with your PR. For example, apt-get, pip, or homebrew will fail to download one of the dependencies for the test suite, or a transient bug will cause the unit tests to timeout. If Travis fails, click the “Details” link and click on the test(s) that is failing. If it doesn’t look like it is failing for reasons related to your PR, you have two options. If you have write permissions for the Spack repository, you should see a “Restart job” button on the right-hand side. If not, you can close and reopen your PR to rerun all of the tests. If the same test keeps failing, there may be a problem with your PR. If you notice that every recent PR is failing with the same error message, it may be that Travis is down or one of Spack’s dependencies put out a new release that is causing problems. If this is the case, please file an issue.
If you take a look in
$SPACK_ROOT/.travis.yml, you’ll notice that we test
against Python 2.6, 2.7, and 3.4-3.7 on both macOS and Linux. We currently
perform 3 types of tests:
Unit tests ensure that core Spack features like fetching or spec resolution are working as expected. If your PR only adds new packages or modifies existing ones, there’s very little chance that your changes could cause the unit tests to fail. However, if you make changes to Spack’s core libraries, you should run the unit tests to make sure you didn’t break anything.
Since they test things like fetching from VCS repos, the unit tests require
and subversion to run. Make sure these are
installed on your system and can be found in your
PATH. All of these can be
installed with Spack or with your system package manager.
To run all of the unit tests, use:
$ spack test
These tests may take several minutes to complete. If you know you are only modifying a single Spack feature, you can run a single unit test at a time:
$ spack test architecture
This allows you to develop iteratively: make a change, test that change, make another change, test that change, etc. To get a list of all available unit tests, run:
$ spack test --list architecture make_executable spec_dag blame license lock build_environment mirror spec_semantics build_env list log build_system_guess module_parsing spec_syntax cd mirror common build_systems multimethod spec_yaml clean module dotkit cc namespace_trie stage commands print_shell_vars lmod compilers optional_deps svn_fetch config providers tcl concretize package_hash tengine debug python file_cache concretize_preferences package_sanity test_activations dependencies spec log_parser config packages url_fetch dependents test_compiler_cmd prefix database packaging url_parse env uninstall spack_lock_wrapper directory_layout patch url_substitution find url spack_yaml environment_modifications pattern variant flake8 versions util_string flag_handlers provider_index versions gpg view git_fetch python_version views graph file_list graph repo web help filesystem hg_fetch sbang activate info lang install spack_yaml arch install link_tree
A more detailed list of available unit tests can be found by running
spack test --long-list.
pytest captures the output of all unit tests. If you add print
statements to a unit test and want to see the output, simply run:
$ spack test -s -k architecture
Unit tests are crucial to making sure bugs aren’t introduced into Spack. If you are modifying core Spack libraries or adding new functionality, please consider adding new unit tests or strengthening existing tests.
There is also a
run-unit-tests script in
runs the unit tests. Afterwards, it reports back to Codecov with the
percentage of Spack that is covered by unit tests. This script is
designed for Travis CI. If you want to run the unit tests yourself, we
suggest you use
Spack uses Flake8 to test for PEP 8 conformance. PEP 8 is a series of style guides for Python that provide suggestions for everything from variable naming to indentation. In order to limit the number of PRs that were mostly style changes, we decided to enforce PEP 8 conformance. Your PR needs to comply with PEP 8 in order to be accepted.
Testing for PEP 8 compliance is easy. Simply run the
$ spack flake8
spack flake8 has a couple advantages over running
flake8 by hand:
- It only tests files that you have modified since branching off of
- It works regardless of what directory you are in.
- It automatically adds approved exemptions from the
flake8checks. For example, URLs are often longer than 80 characters, so we exempt them from line length checks. We also exempt lines that start with “homepage”, “url”, “version”, “variant”, “depends_on”, and “extends” in
More approved flake8 exemptions can be found here.
If all is well, you’ll see something like this:
$ run-flake8-tests Dependencies found. ======================================================= flake8: running flake8 code checks on spack. Modified files: var/spack/repos/builtin/packages/hdf5/package.py var/spack/repos/builtin/packages/hdf/package.py var/spack/repos/builtin/packages/netcdf/package.py ======================================================= Flake8 checks were clean.
However, if you aren’t compliant with PEP 8, flake8 will complain:
var/spack/repos/builtin/packages/netcdf/package.py:26: [F401] 'os' imported but unused var/spack/repos/builtin/packages/netcdf/package.py:61: [E303] too many blank lines (2) var/spack/repos/builtin/packages/netcdf/package.py:106: [E501] line too long (92 > 79 characters) Flake8 found errors.
Most of the error messages are straightforward, but if you don’t understand what
they mean, just ask questions about them when you submit your PR. The line numbers
will change if you add or delete lines, so simply run
spack flake8 again
to update them.
Try fixing flake8 errors in reverse order. This eliminates the need for
multiple runs of
spack flake8 just to re-compute line numbers and
makes it much easier to fix errors directly off of the Travis output.
pep8-naming require a number of dependencies in order
to run. If you installed
easiest way to ensure the right packages are on your
spack activate py-flake8 spack activate pep8-naming
so that all of the dependencies are symlinked to a central location. If you see an error message like:
Traceback (most recent call last): File: "/usr/bin/flake8", line 5, in <module> from pkg_resources import load_entry_point ImportError: No module named pkg_resources
that means Flake8 couldn’t find setuptools in your
Spack uses Sphinx to build its documentation. In order to prevent things like broken links and missing imports, we added documentation tests that build the documentation and fail if there are any warning or error messages.
Building the documentation requires several dependencies, all of which can be installed with Spack:
Sphinx has several required dependencies.
If you installed
py-sphinx with Spack, make sure to add all of these
dependencies to your
PYTHONPATH. The easiest way to do this is to run:
$ spack activate py-sphinx $ spack activate py-sphinx-rtd-theme $ spack activate py-sphinxcontrib-programoutput
so that all of the dependencies are symlinked to a central location. If you see an error message like:
Extension error: Could not import extension sphinxcontrib.programoutput (exception: No module named sphinxcontrib.programoutput) make: *** [html] Error 1
that means Sphinx couldn’t find
py-sphinxcontrib-programoutput in your
Once all of the dependencies are installed, you can try building the documentation:
$ cd "$SPACK_ROOT/lib/spack/docs" $ make clean $ make
If you see any warning or error messages, you will have to correct those before your PR is accepted.
There is also a
run-doc-tests script in
share/spack/qa. The only
difference between running this script and running
make by hand is that
the script will exit immediately if it encounters an error or warning. This
is necessary for Travis CI. If you made a lot of documentation changes, it is
much quicker to run
make by hand so that you can see all of the warnings
If you are editing the documentation, you should obviously be running the documentation tests. But even if you are simply adding a new package, your changes could cause the documentation tests to fail:
package_list.rst:8745: WARNING: Block quote ends without a blank line; unexpected unindent.
At first, this error message will mean nothing to you, since you didn’t edit that file. Until you look at line 8745 of the file in question:
Description: NetCDF is a set of software libraries and self-describing, machine- independent data formats that support the creation, access, and sharing of array-oriented scientific data.
Our documentation includes a list of all Spack packages. If you add a new package, its docstring is added to this page. The problem in this case was that the docstring looked like:
class Netcdf(Package): """ NetCDF is a set of software libraries and self-describing, machine-independent data formats that support the creation, access, and sharing of array-oriented scientific data. """
Docstrings cannot start with a newline character, or else Sphinx will complain. Instead, they should look like:
class Netcdf(Package): """NetCDF is a set of software libraries and self-describing, machine-independent data formats that support the creation, access, and sharing of array-oriented scientific data."""
Documentation changes can result in much more obfuscated warning messages. If you don’t understand what they mean, feel free to ask when you submit your PR.
Spack uses Codecov to generate and report unit test coverage. This helps us tell what percentage of lines of code in Spack are covered by unit tests. Although code covered by unit tests can still contain bugs, it is much less error prone than code that is not covered by unit tests.
Codecov provides browser extensions for Google Chrome, Firefox, and Opera. These extensions integrate with GitHub and allow you to see coverage line-by-line when viewing the Spack repository. If you are new to Spack, a great way to get started is to write unit tests to increase coverage!
Unlike with Travis, Codecov tests are not required to pass in order for your PR to be merged. If you modify core Spack libraries, we would greatly appreciate unit tests that cover these changed lines. Otherwise, we have no way of knowing whether or not your changes introduce a bug. If you make substantial changes to the core, we may request unit tests to increase coverage.
If the only files you modified are package files, we do not care about coverage on your PR. You may notice that the Codecov tests fail even though you didn’t modify any core files. This means that Spack’s overall coverage has increased since you branched off of develop. This is a good thing! If you really want to get the Codecov tests to pass, you can rebase off of the latest develop, but again, this is not required.
Spack is still in the beta stages of development. Most of our users run off of the develop branch, and fixes and new features are constantly being merged. So how do you keep up-to-date with upstream while maintaining your own local differences and contributing PRs to Spack?
The easiest way to contribute a pull request is to make all of your changes on
new branches. Make sure your
develop is up-to-date and create a new branch
off of it:
$ git checkout develop $ git pull upstream develop $ git branch <descriptive_branch_name> $ git checkout <descriptive_branch_name>
Here we assume that the local
develop branch tracks the upstream develop
branch of Spack. This is not a requirement and you could also do the same with
remote branches. But for some it is more convenient to have a local branch that
Normally we prefer that commits pertaining to a package
<package-name>: descriptive message. It is important to add
descriptive message so that others, who might be looking at your changes later
(in a year or maybe two), would understand the rationale behind them.
Now, you can make your changes while keeping the
develop branch pure.
Edit a few files and commit them by running:
$ git add <files_to_be_part_of_the_commit> $ git commit --message <descriptive_message_of_this_particular_commit>
Next, push it to your remote fork and create a PR:
$ git push origin <descriptive_branch_name> --set-upstream
GitHub provides a tutorial
on how to file a pull request. When you send the request, make
If you need this change immediately and don’t have time to wait for your PR to be merged, you can always work on this branch. But if you have multiple PRs, another option is to maintain a Frankenstein branch that combines all of your other branches:
$ git co develop $ git branch <your_modified_develop_branch> $ git checkout <your_modified_develop_branch> $ git merge <descriptive_branch_name>
This can be done with each new PR you submit. Just make sure to keep this local
branch up-to-date with upstream
What if you made some changes to your local modified develop branch and already committed them, but later decided to contribute them to Spack? You can use cherry-picking to create a new branch with only these commits.
First, check out your local modified develop branch:
$ git checkout <your_modified_develop_branch>
Now, get the hashes of the commits you want from the output of:
$ git log
Next, create a new branch off of upstream
develop and copy the commits
that you want in your PR:
$ git checkout develop $ git pull upstream develop $ git branch <descriptive_branch_name> $ git checkout <descriptive_branch_name> $ git cherry-pick <hash> $ git push origin <descriptive_branch_name> --set-upstream
Now you can create a PR from the web-interface of GitHub. The net result is as follows:
- You patched your local version of Spack and can use it further.
- You “cherry-picked” these changes in a stand-alone branch and submitted it as a PR upstream.
Should you have several commits to contribute, you could follow the same procedure by getting hashes of all of them and cherry-picking to the PR branch.
It is important that whenever you change something that might be of importance upstream, create a pull request as soon as possible. Do not wait for weeks/months to do this, because:
- you might forget why you modified certain files
- it could get difficult to isolate this change into a stand-alone clean PR.
Other developers are constantly making contributions to Spack, possibly on the
same files that your PR changed. If their PR is merged before yours, it can
create a merge conflict. This means that your PR can no longer be automatically
merged without a chance of breaking your changes. In this case, you will be
asked to rebase on top of the latest upstream
First, make sure your develop branch is up-to-date:
$ git checkout develop $ git pull upstream develop
Now, we need to switch to the branch you submitted for your PR and rebase it on top of develop:
$ git checkout <descriptive_branch_name> $ git rebase develop
Git will likely ask you to resolve conflicts. Edit the file that it says can’t be merged automatically and resolve the conflict. Then, run:
$ git add <file_that_could_not_be_merged> $ git rebase --continue
You may have to repeat this process multiple times until all conflicts are resolved. Once this is done, simply force push your rebased branch to your remote fork:
$ git push --force origin <descriptive_branch_name>
Rebasing with cherry-pick¶
You can also perform a rebase using
cherry-pick. First, create a temporary
$ git checkout <descriptive_branch_name> $ git branch tmp
If anything goes wrong, you can always go back to your
Now, look at the logs and save the hashes of any commits you would like to keep:
$ git log
Next, go back to the original branch and reset it to
Before doing so, make sure that you local
develop branch is up-to-date
$ git checkout develop $ git pull upstream develop $ git checkout <descriptive_branch_name> $ git reset --hard develop
Now you can cherry-pick relevant commits:
$ git cherry-pick <hash1> $ git cherry-pick <hash2>
Push the modified branch to your fork:
$ git push --force origin <descriptive_branch_name>
If everything looks good, delete the backup branch:
$ git branch --delete --force tmp
Sometimes you may end up on a branch that has diverged so much from develop that it cannot easily be rebased. If the current commits history is more of an experimental nature and only the net result is important, you may rewrite the history.
First, merge upstream
develop and reset you branch to it. On the branch
in question, run:
$ git merge develop $ git reset develop
At this point your branch will point to the same commit as develop and thereby the two are indistinguishable. However, all the files that were previously modified will stay as such. In other words, you do not lose the changes you made. Changes can be reviewed by looking at diffs:
$ git status $ git diff
The next step is to rewrite the history by adding files and creating commits:
$ git add <files_to_be_part_of_commit> $ git commit --message <descriptive_message>
After all changed files are committed, you can push the branch to your fork and create a PR:
$ git push origin --set-upstream